15A 125V NEMA L6-15P Twist-Lock Power Cords

General Information:

The NEMA L6-15P is a 3 Wire grounded plug with a hot, hot and ground pin rated up to 250V and 15A. This plug can be locked into place on the matching receptacle which prevents nuisance disconnection. The NEMA L6 Series is most commonly used for 208V or 240V applications,  This plug can be distinguished by its tight pin alignment on the plug head and the outward turned tab on the ground pin.

What does the NEMA L6-15P Plug into?

The NEMA L6-15P connects to both the NEMA L6-15R Connector which is commonly found on extension cords and power drops, and the outlet which is commonly found in industrial settings where 208/240V Power supply is used.

General Information:

The IEC 60320 C13 is a grounded 3 Wire connector rated up to 250V and 15 Amps. The C13 mates with a C14 inlet, and is commonly used in a jumper cable scenario in IT Installations providing power from a PDU to a server, router, switch or other computing device. Most people know the C13 as 'the thing that plugs into my computer' because it is the standard connector used to power most desktop computers. In a desktop computer application, the most common cable is the NEMA 5-15P to C13, which connects your standard North American wall outlet to a desktop computer. The iec 320 c13 c14 plug and connector are synonymous with Information Technology equipment primarily, but the C13 can be found powering equipment like medical devices and gaming consoles.

What does the IEC 60320 C13 Connect to?

The IEC 320 type C13 connector is designed to connect to the IEC 320 C14 plug and inlet. The C14 Plug is commonly found on power cords located in office, commercial or data center settings since the C13 inlet is usually only found in those environments. The C14 Inlet is commonly found on a variety of IT Equipment like monitors, switches, printers, power adapters, and more.

General Information:

The IEC 60320 C19 is a grounded 3 Wire connector rated up to 250V and 20 Amps. The C19 can be found on a variety of power cords, including NEMA to 320 Adapter cords, and International Plug types to IEC 320 connectors, but the most common application is the IEC 320 C20 to C19 power cord which is a a standard extension cord used to power high powered IT Equipment. The C19 is typically used in high powered blade server chassis, large network routers, and other IT equipment that draws more power than a standard C13 can accommodate.

What does the IEC 60320 C19 Connect to?

The IEC 60320 type C19 connector is designed to connect to the IEC 320 C20 plug and Inlet. THE C20 Plug is commonly found on power cords used in the data center industry. The C20 Inlet can be found on a variety of high powered IT Equipment ranging from switches to Un-Interrupted Power Supply systems.

General Information:

The NEMA L6-15R is a grounded (Hot-Hot-Neutral) Connector that is rated up to 250V and 15A. The connector couples with the L6-15P and locks into place preventing nuisance disconnection. This feature makes it popular in commercial and industrial settings where there is high traffic. This connector is common in the L6-15 Extension Cord Series where it is used to extend power from a L6R wall receptacle or connector to a certain location for convenience.

What does the NEMA L6-15R Connect to?

The NEMA L6-15R Locking Connector is design to be twisted into place with the NEMA L6-15P Plug or Inlet. The plug is used on many different power cords, and the Inlet can be found on a variety of Industrial equipment using 250V and 15A.

General Information:

The open end of a power supply cord is hard wired to another device, providing power either to our from that device. Unless otherwise noted, our power supply cords come standard with a 2" ROJ (Remove Outer Jacket) and a 1/4" Strip. The ROJ length determines the length of the individual conductors, and the Strip length determines the amount of copper exposed on the end of each conductor. If you require a custom ROJ or Strip length, please don't hesitate to reach out to us.

NACC

ICC

International Color Code(ICC) vs. North American Color Code(NACC)

For the majority of our customers, the color code used for the cordage is negligible. However, for OEM customers, or customers dealing with government installations or projects that have highly specified cords the color code used will be important to establish. Our standard color code for our Cut/ Remove of Outer Jacket/ Strip Conductor Job is North American Color Code (NACC).