The NEMA 6-20P Power Cords connects to any standard NEMA 6-20R female outlet receptacle or connector. Our adapter cords include the IEC c13, c19 and the c15 for high temp applications. The cord connector variation you need will depend on the device you are trying power. Inspect the power inlet on the back of your equipment, and make sure that the device requires 220v/240v/250v and 20amp.
The cordage of the power cord set will determine the amperage rating, in an effort to provide more pricing options, we offer a variety of wire gauge options. Refer to your devices name plate to determine your amperage requirements.
If you are not sure what is a NEMA 6-20p plug, or NEMA 6-20P vs. 6-15P refer to our informational snippets below.
Powered by Froala Editor
For help finding a product or for product additional product information , call us at (860) 763-2100 or email firstname.lastname@example.org
The NEMA 6-20P Power Cords are rated up to 250VAC and 20A. This power cord set is designed for applications that require extra power than the standard 5-20P Power cords and are compatible with a Hot-Hot-Ground(2 Pole) wiring connection. These cord sets are typically used for connecting a 6-20R wall receptacle or connector, to a particular device. The device you intend to power will have a certain power inlet style that will likely match with one of our connector options in the 6-20P Power Cord Series. Refer with your team to make sure your power demands are satisfied under the voltage and ampere ratings of the cord you choose.
The NEMA 6-20P to Open/Whip/Pig Tail- NACC is a power supply cord rated for 250VAC and 20A max with 12AWG. NACC, North American Color Code, refers to the color code of the conductor insulation which is BLACK / WHITE / GREEN. This cord is for field installation to equipment or device that requires a line, line and ground conductor (not exceeding the rated power of the cord) to operate. Standard Whips are Remove Outer Jacket(ROJ) 2" and then each conductor is stripped 1/4" to bare conductor. Other ROJ/Strip combinations are available for bulk quantities upon request. For two pole cords like this, "X" pole is generally black and "Y" pole is white, with green as the ground conductor.
The NEMA 6-20P is a 3 Wire grounded plug featuring two blades and a ground pin, rated up to 250V AC and 20A. The 6-20P has a horizontal and vertical blade to prevent attachment to lower ampere rated receptacles. However, the 6-20R (receptacle) offers a "T" slot allowing connection of both a 6-20P and a 6-15P. Common applications are commercial ovens and large air condition units.
What does the 6-20P Connect to?
|The NEMA 6-20P Connects to both the NEMA 6-20R Connector and the NEMA 6-15/20R Wall Outlet. The Connector is used for extension cords and power drops, while the outlet is found in some commercial and industrial buildings.|
The NEMA 6-20R (T-Slot) is a 3 Wire grounded connector rated up to 250VAC and 20A. The 6-20P has a horizontal and vertical blade to prevent attachment to lower ampere rated receptacles. However, the 6-20R (receptacle) offers a "T" slot allowing connection of both a 6-20P and a 6-15P. Common applications are commercial ovens and large air condition units. This connector is found in our NEMA 6-20 Extension cord Series which are commo
The IEC 60320 C15 is a grounded 3 Wire connector rated up to 250V & 10 Amps Internationally and 125V/250V & 15 Amps in North America. The C15 mates with a C16 inlet as well as a C14 Inlet and is commonly used in IT Installations providing power from a PDU to a server, router, switch or other computing device. The C15 is a HIGH TEMPERATURE connector rated up to 120°C, unlike the 70°C rating of the C13. The C15 is commonly used in in electric kettles and other household appliances that involve higher temperatures than a normal C13 is made to withstand. The C15 connector is commonly used with 18awg SJT(OW), 16awg SJT(OW), and 14awg SJT(OW).
The open end of a power supply cord is hard wired to another device, providing power either to our from that device. Unless otherwise noted, our power supply cords come standard with a 2" ROJ (Remove Outer Jacket) and a 1/4" Strip. The ROJ length determines the length of the individual conductors, and the Strip length determines the amount of copper exposed on the end of each conductor. If you require a custom ROJ or Strip length, please don't hesitate to reach out to us.
With over 30 years of experience in the power and data industry, we have the expertise to help you find exactly what you are looking for. We're more than just an online store, we have experts in the power and data industry that can help you online, over the phone, or via email.
Have a request from a customer and not sure what you need? Let us quote it for you!
Looking for a specific product and can't find it? Let us find it for you!
Need a question answered quickly? Live Chat with us!