Saf-D-Grid pwoer cords are rated for both AC and DC use and are primarly used in Data Centers to power Cisco, Arista, and other switching devices.
IEC320 C14 to Anderson Saf-D-Grid 400V Power Cables
These power cords are generally used to power switches, power supply units and routers in a data cabinet. These high power connectors have recently become increasingly popular because of their rigid connector body and superior material composition allowing for much higher power output in the same profile. The C14 plug can access power from a standard rack-mount PDU located in a typical data rack cabinet.
Common uses for C14 to Saf-D-Grid |
---|
Powering Nexus 9000 switches |
Powering Nexus power supply units (PSUs) |
Powering Cisco 5000 routers |
Powering high powered rack-mount switch |
Powering high powered rack-mount server |
Available Cordages
Available Colors
Available Connectors
IEC 60320 C14
Saf-D-Grid 400V (Connector)
IEC C20 to Saf-D-Grid 400V Power Cords
These power cords are generally used to power switches, power supply units and routers in a data cabinet. These high power connectors have recently become increasingly popular because of their rigid connector body and superior material composition allowing for much higher power output in the same profile. The C20 plug can access power from a standard rack-mount PDU located in a typical data rack cabinet.
Common uses for C20 to Saf-D-Grid |
---|
Powering high powered rack-mount server |
Powering high powered rack-mount switch |
Powering Cisco 5000 routers |
Powering Nexus power supply units (PSUs) |
Powering Nexus 9000 switches |
Available Cordages
Available Colors
Available Connectors
IEC 60320 C20
Saf-D-Grid 400V (Connector)
Saf-D-Grid 400 to Saf-D-Grid 400, T-Latch, 25A 400V Power Cord
These Saf-D-Grid 400V Extension cables are used for powering a high powered Switch or Server from a custom Saf-D-Grid receptacle Power Supply Unit. These power cables are rated from up to 600 Volts and 25 Amps which is a substantial amount of power for the size of the connector bodies.
Common uses for Saf-D-Grid 400V |
---|
Powering Nexus 9000 switches |
Powering Nexus 9000 switches |
Powering Cisco 5000 routers |
Powering high powered rack-mount switch |
Powering high powered rack-mount server |
Available Cordages
Available Colors
Available Connectors
Saf-D-Grid 400V
Saf-D-Grid 400V (Connector)
Saf-D-Grid 400V (Connector)
The Saf-D-Grid 400V Connector is rated for 400VAC and 16 Amps of power. It mates with the matching Saf-D-Grid 400V Inlet located on various data center equipment. This is the highest power rated connector for the footprint of an IEC 60320 connector.
Specifications
Current (Amps) | 16 Amps |
Voltage (Volts) | 400V |
Mates with: Saf-D-Grid 400V Inlet
Commonly found on: |
Data centers |
High energy servers |
High powered rack mount PDU |
High powered switch |
IEC 60320 C14
The IEC 60320 C14 is a grounded 3 Wire Plug rated up to 250V and 15 Amps. The C14 mates with a C13 outlet, typically found on Data Center/IT specific PDUs (Power Distribution Unit). The most common configuration for a C14 is in a jumper cable scenario, providing power from a PDU to IT Equipment.
Synonyms
Specifications
Current (Amps) | 15 Amps |
Voltage (Volts) | 250 volts |
Mates with: IEC 60320 C13 Outlet
Commonly found on: |
High powered rack mount PDU |
Power distribution unit |
Data centers |
IEC 60320 C20
The IEC 60320 C20 is a grounded 3 Wire Plug rated up to 250V and 20 Amps. The C20 mates with a C19 outlet, typically found on Data Center/IT specific PDUs (Power Distribution Unit). The most common configuration for a C20 is in a jumper cable scenario, providing power from a PDU to a blade server chassis, high powered server, large network router, or similar device.
Specifications
Current (Amps) | 20 Amps |
Voltage (Volts) | 250 volts |
Mates with: IEC 60320 C19 Outlet
Commonly found on: |
High powered rack mount PDU |
Power distribution unit |
Data centers |
Saf-D-Grid 400V
The Saf-D-Grid 400V Plug connector is rated for 400VAC and 16 Amps. The configuration can be connected with the matching Inlet type, and is the highest rated connector body in the footprint of IEC 60320.
Specifications
Current (Amps) | 16 Amps |
Voltage (Volts) | 400V |