Woco Logo

International Power Cords

Difference between international plug types

There are a handful of standard electrical power outlets that are uniquely specified by local standards and approvals. These power plug configurations are classified by “Type”, and all will have similar dimensional specs no matter where they are used in the world. Most plugs will be used in several different countries, which will change the power rating and the “standard” it was built to but they will still be identical in appearance. It is not recommended to use power cords in a country they were not approved for, because the manufacturer has designed the cable with considerations of the supply voltage of 1 country that may not be suitable or universal with the country you plan to bring it to.

IEC socket types and how they are rated around the world.

The IEC plug types are used around the world, and their voltages and amperage rating changes based on where they are being used. This is due to local electrical safety, and the different distribution voltages and frequencies supplied around the world. To learn more about this, refer to our extensive international power reference page, that can be accessed by the Reference Tab on this page.

International IEC Plug Type B Power Cords | 5-15P Style International Power

The IEC Type B Power Cables are found all around the globe from the United States to Guatemala to Japan. This plug type is grounded with a line and pin. The operating voltage and frequency will depend on the country, but the general configuration is the same. We offer type B power cord with approvals for international countries like Japan and Thailand with many lengths and connector configurations available.

Common uses for Type B

Power a device in Japan
Power standard house hold items (Japan)

Available Cordages

0.75mm2 -3c VCTF
1.25mm2 -3c VCTF

Available Approvals

JET
PSE

Available Colors

Available Connectors

Japan JIS8303 3-Pin 5-15P

Japan JIS8303 3-Pin 5-15P

IEC 60320 C5

IEC 60320 C5

IEC 60320 C13

IEC 60320 C13

IEC 60320 C15

IEC 60320 C15

IEC 60320 C13

IEC 60320 C13

International IEC Type C Power Cables | Europlug Power Cords

The IEC Type C Power cords are powered through the ungrounded plug that is used throughout Europe and various regions of the world. These plugs are rated for 2.5 Amps and 250VAC and can be distinguished from other plug types by the two rounded pins on an elongated diamond shaped plug face. These cables are used to power small equipment that does not require a grounding conductor.

Common uses for Type C

Power a non grounded, double insulated device
Power a small device in Europe

Available Cordages

0.75mm2 -3c HO5VV-F

Available Approvals

VDE

Available Colors

Available Connectors

Europe CEE7/16 2Pin 2.5A 250V

Europe CEE7/16 2Pin 2.5A 250V

Europe CEE7/16 2Pin 2.5A 250V

Europe CEE7/16 2Pin 2.5A 250V

IEC 60320 C7

IEC 60320 C7

International IEC Type E, F and E/F | Schuko Power Cables

The Schuko Plug Type, also known as CEE7/7 or Type E/F is the most used plug in Europe. In countries that do not have their own 250 Volt plug type, they will often use the Schuko because of its robust design and superior safety features. This plug type is rated for 16 Amperes of power. We utilize the E/F configuration for our power cables because of the superior safety of the grounding feature.

Common uses for Type E/F

Power a standard household electrical device (Europe)

Available Cordages

0.75mm2 -3c HO5VV-F
1.0mm2 -3c H05VV-F
1.5mm2 -3c HO5VV-F

Available Approvals

KC
ENEC
KEMA
VDE

Available Colors

Available Connectors

European Schuko CEE7/7 - Straight

European Schuko CEE7/7 - Straight

European Schuko CEE7/7 - Down Angle

European Schuko CEE7/7 - Down Angle

IEC 60320 C5

IEC 60320 C5

IEC 60320 C13

IEC 60320 C13

IEC 60320 C19

IEC 60320 C19

Europe Schuko CEE7/3 (Female)

Europe Schuko CEE7/3 (Female)

International IEC Type G Fuse Protected Power Cables | BS1363 Power Cords

The type G Plug is rated for 250VAC and 13 Amps globally, and features a dedicated ground conductor and an internally fuse protected. The plug is easily identified from the fuse compartment located on the plug face. This added protection was designed as an additional safety measure for the end user. In the event of an electrical short, the amount of time before the over current device trips is greatly reduced by adding it at the plug instead of at the electrical panel.

Common uses for Type G

Power a standard household electrical device (UK)

Available Cordages

0.75mm2 -3c HO5VV-F

Available Approvals

ASTA
ENEC
HKSI
PSB
SASO
VDE

Available Colors

Available Connectors

UK BS1363 ANGLED

UK BS1363 ANGLED

UK BS1363 Angled (F)

UK BS1363 Angled (F)

IEC 60320 C19

IEC 60320 C19

IEC 60320 C13

IEC 60320 C13

IEC 60320 C7

IEC 60320 C7

IEC 60320 C5

IEC 60320 C5

International IEC Plug Type I Power Cords | Australia, New Zealand & Argentina Power

The IEC Type I Plug type is 3 pin, grounded plug with 2 oblique blades rated for 250VAC and 10 – 15 Amperes globally. It is the standard plug type for many countries globally, however the largest countries of note are Argentina, Australia, China and New Zealand. Each country has its own unique approval agency that will determine if the cable is listed for use in that country. Luckily, we stock many variations of each approval type for all of your Type I Power needs.

Common uses for Type I

Power a standard household electrical device (Australia)
Power a standard household electrical device (New Zealand)
Power a standard household electrical device (Argentina)
Power a standard household electrical device (China)

Available Cordages

1.0mm2 -3c H05VV-F
1.5mm2 -3c HO5VV-F
0.75mm2 -3c RVV

Available Approvals

SAA
CCC
Argentina IRAM

Available Colors

Available Connectors

Australia AS/NZS 3112 2 Pin - 2.5A

Australia AS/NZS 3112 2 Pin - 2.5A

Australia AS/NZS 3112 3 Pin - 10A

Australia AS/NZS 3112 3 Pin - 10A

Argentina IRAM 2063 2 Pin (M) - 2.5A

Argentina IRAM 2063 2 Pin (M) - 2.5A

Argentina IRAM 2073 3 Pin (M) - 10A

Argentina IRAM 2073 3 Pin (M) - 10A

China GB2099 3Pin 10A Plug

China GB2099 3Pin 10A Plug

China GB2099 3Pin 16A Plug

China GB2099 3Pin 16A Plug

IEC 60320 C5

IEC 60320 C5

IEC 60320 C7

IEC 60320 C7

IEC 60320 C13

IEC 60320 C13

IEC 60320 C19

IEC 60320 C19

Australia/New Zealand AS/NZS 3112 10A 250V

Australia/New Zealand AS/NZS 3112 10A 250V

Argentina IRAM 2073 Connector (F) 10A 250V

Argentina IRAM 2073 Connector (F) 10A 250V

International Plug Type J Power Cords | Swiss Power Cables

The Type J Swiss power plug type has 3 pins, one of which is a dedicate ground conductor that is orientated just above the other 2 load pins. It is rated for 250VAC and 10 or 16 Amps globally. It is rated for both 10 Amps and 16 Amps, but the 16 Amp plug has pins shaped more like a square which cannot be connected to the 10 Amp receptacle to prevent electrical fire hazard.

Common uses for Type J

Power a standard household electrical device (Switzerland)

Available Cordages

1.5mm2 -3c HO5VV-F
1.0mm2 -3c H05VV-F

Available Approvals

SEV

Available Colors

Available Connectors

Switzerland SEV 1011 3-Pin 10A (M) Type J

Switzerland SEV 1011 3-Pin 10A (M) Type J

Switzerland SEV 1011 3-Pin 16A (M) Type J

Switzerland SEV 1011 3-Pin 16A (M) Type J

Switzerland SEV 1011 3-Pin 10A (F) Type J

Switzerland SEV 1011 3-Pin 10A (F) Type J

IEC 60320 C5

IEC 60320 C5

IEC 60320 C13

IEC 60320 C13

IEC 60320 C15

IEC 60320 C15

IEC 60320 C19

IEC 60320 C19

International Plug Type K Power Cables | Denmark AFSNIT 107-2-D1 Power

The Type K Denmark Plug Type is approved under the DEMKO set of approvals and is built to the AFSNIT 107-2-D1 set of standards conforming to IEC Type J Plug layout. This plug has 3 pins including a short stubby dedicated ground pin located above the two load pins and is rated for 250 VAC and 10 Amperes globally.

Common uses for Type K

Power a standard household electrical device (Denmark)

Available Cordages

0.75mm2 -3c HO3VV-F
1.0mm2 -3c H05VV-F
1.5mm2 -3c HO5VV-F

Available Approvals

DEMKO

Available Colors

Available Connectors

Denmark AFSNIT 107-2-D1 3Pin 13A

Denmark AFSNIT 107-2-D1 3Pin 13A

Denmark AFSNIT 107-2-D1 Connector (F) 16A 250V

Denmark AFSNIT 107-2-D1 Connector (F) 16A 250V

IEC 60320 C19

IEC 60320 C19

IEC 60320 C13

IEC 60320 C13

IEC 60320 C5

IEC 60320 C5

International Plug Type L Power Cords | Italy CEI 23-16/VII

The IEC Type L Power Cables are most associated to the Italian CEI 23-16 Set of standards, which defines the 10- and 16-Amp configurations of this plug. It rated for 250 VAC and is the standard power plug for energizing common household appliances in Italy. The two plug types cannot be inserted into one another as they are not identically spaced. This is done to prevent electrical hazard by plugging a 16 Amp plug into an outlet rated for only 10 Amps.

Common uses for Type L

Power a standard household electrical device (Italy)

Available Cordages

0.75mm2 -3c HO5VV-F
1.0mm2 -3c H05VV-F
1.5mm2 -3c HO5VV-F
0.75mm2 -3c H03RN-F
1.0mm2 -3c H05RN-F

Available Approvals

IMQ
SAA
ENEC
CE

Available Colors

Available Connectors

Italy CEI 23-50 3-Pin 16A Type L

Italy CEI 23-50 3-Pin 16A Type L

Italy CEI23-50 (CEI23-16) 10A(S11) - Type L

Italy CEI23-50 (CEI23-16) 10A(S11) - Type L

IEC 60320 C7

IEC 60320 C7

IEC 60320 C5

IEC 60320 C5

IEC 60320 C13

IEC 60320 C13

IEC 60320 C19

IEC 60320 C19

International IEC Plug Type M Power Cables | 15 Amp South African & Indian Power

The IEC Type M Power Cords are the heavier duty Type D (10 Amp Rated) plug type, and are rated for 250VAC and 15 Amps of power. They are used in many places globally but are know specifically for South Africa and India power. The South Africa SANS 164-1 and India IS 1293 are the same specifications for the design of the plug and have 3 pins, with a larger ground pin located above the 2 matching line pins.

Common uses for Type M

Power a standard household electrical device (South Africa)

Available Cordages

1.0mm2 -3c H05VV-F
0.75mm2 -3c HO5VV-F

Available Approvals

SABS
ENEC
VDE

Available Colors

Available Connectors

South Africa SANS 164-1 (BS546) 3Pin 16A (LARGE) Type M

South Africa SANS 164-1 (BS546) 3Pin 16A (LARGE) Type M

IEC 60320 C5

IEC 60320 C5

IEC 60320 C7

IEC 60320 C7

IEC 60320 C13

IEC 60320 C13

IEC 60320 C19

IEC 60320 C19

BS546 15A

BS546 15A

International IEC Plug Type N Power Cables | NBR14136 Brazil Power

The Type N Brazil plug type comes in 2 variations rated for 10 Amps and 20 Amps each respectively. They each have slightly different sized pins that will prevent the 20 Amp plug from being plugged into a 10 Amp outlet, creating a fire hazard. These plugs are rated for 250VAC and come in a straight cord grip, or a down angled cord grip for installations in tight locations like behind couches or furniture.

Common uses for Type N

Power a standard household electrical device (Brazil)

Available Cordages

1.0mm2 -3c H05VV-F
0.75mm2 -3c HO5VV-F

Available Approvals

INMETRO

Available Colors

Available Connectors

Brazil NBR14136 10A 250V (3 Pin 3.7mm Grounded)

Brazil NBR14136 10A 250V (3 Pin 3.7mm Grounded)

IEC 60320 C5

IEC 60320 C5

IEC 60320 C13

IEC 60320 C13

Brazil NBR14136 3PIN 10A 250V

Brazil NBR14136 3PIN 10A 250V

IEC 60320 C19

IEC 60320 C19

Thailand Power Cords | TISI Approved Cord Sets

Thailand uses 220V AC electricity. Power outlets usually feature two-prong round or flat sockets that are ungrounded. TIS 166-2549, CEE 7/16 (Non-Polarized) Type O Plug

Common uses for Type O

Power small household devices (Thailand)

Available Cordages

0.75mm2 -3c HO5VV-F

Available Approvals

TISI (Thailand)

Available Colors

Available Connectors

Thailand TIS 166-2549 16A 250V

Thailand TIS 166-2549 16A 250V

IEC 60320 C5

IEC 60320 C5

IEC 60320 C5

IEC 60320 C5

The IEC 60320 C5 is a grounded 3 Wire connector rated up to 250V and 2.5 Amps Internationally or 125V and 10 Amps in North America. The C5 mates with a C6 inlet, and is commonly used for laptop power supplies, projectors, and some televisions. Being slightly smaller in size than the C13, the C5 can be a good choice for smaller appliances. This connector is sometimes referred to as a "Mickey Mouse" connector due to the shape of the connector looking similar to the kids television show character.

Synonyms

  • iec-60320-c5
  • mickey mouse connector
  • C5 Plug
  • IEC c5
  • IEC 320 C5

Specifications

Voltage (Volts) 250 volts
Current (Amps) 10 Amps

Mates with: IEC 60320 C6 Inlet

IEC 60320 C6 Inlet

Commonly found on:

Monitor power supply
Electric razor
Portable projector
Laptop power supply
LCD monitor
Instrument amplifiers
Audio equipment
Video equipment

IEC 60320 C7

IEC 60320 C7

The IEC 60320 C7 is an ungrounded 2 Wire connector rated up to 250V and 2.5 Amps Internationally or 125V and 10 Amps in North America. The C7 mates with a C8 inlet, and is commonly used for laptop power supplies, video game consoles, televisions, and other double-insulated small appliances. This connector is sometimes referred to as a "Figure-8" or "Shotgun" connector due to it's shape. A variation of the C7 exists, sometimes referred to as a C7P or C7 Polarized, although it is not documented in the IEC 60320 standard. The C7P has one square side and one circular side so the connector only mates with the inlet using the correct pin configuration.

Synonyms

  • c7 power cord
  • iec 320 C7
  • iec c7
  • shotgun connector

Specifications

Voltage (Volts) 125 volts
Current (Amps) 10 Amps

Mates with: IEC 60320 C8 Inlet

IEC 60320 C8 Inlet

Commonly found on:

Non grounded low power device
Video game consoles
Televisions
Small stereo systems
Small radios

IEC 60320 C13

IEC 60320 C13

The IEC 60320 C13 is a grounded 3 Wire connector rated up to 250V and 15 Amps. The C13 mates with a C14 inlet, and is commonly used in a jumper cable scenario in IT Installations providing power from a PDU to a server, router, switch or other computing device. Most people know the C13 as 'the thing that plugs into my computer' because it is the standard connector used to power most desktop computers. In a desktop computer application, the most common cable is the NEMA 5-15P to C13, which connects your standard North American wall outlet to a desktop computer.

Synonyms

  • IEC 60320 C14 Receptacle
  • c14 connector
  • c14 receptacle
  • c14 outlet

Specifications

Voltage (Volts) 125/250V
Current (Amps) 15 Amps

Mates with: IEC 60320 C14 Inlet

IEC 60320 C14 Inlet

Commonly found on:

Data centers
Desktop computers
Desktop monitors
Medical equipment
Test equipment
IT equipment
Commercial appliances
Professional food equipment
Power distribution connection
Audio equipment

IEC 60320 C15

IEC 60320 C15

The IEC 320 C15 Power cable is used to power electrical devices that emit so much heat (intentionally or unintentionally) that they require a power connection that can withstand more than the 70 °C (158 °F) temperature rating of the standard C13. In combination with the C14 plug type, the use cases of this high-temperature cable are almost exclusively data center environments. This cable would most likely be found supplying a High-Powered Switch power from a rack-mounted PDU power supply source. If your equipment has a IEC320 C16 Inlet it should only be mated with the matching C15-Power Connector.

Synonyms

  • kettle power cable
  • high temp iec connector
  • c15 power
  • kettle lead
  • notched c13
  • cisco c13
  • keyed c13
  • keyed power cord
  • hot condition coupler
  • kettle plug

Specifications

Voltage (Volts) 125/250V
Current (Amps) 15 Amps

Mates with: IEC 60320 C16 Inlet

IEC 60320 C16 Inlet

Commonly found on:

Electric kettles
IoE (Internet over Ethernet) Switches
Kitchen Appliances
High energy servers
Home stills
Data centers

IEC 60320 C19

IEC 60320 C19

The IEC 60320 C19 is a grounded 3 Wire connector rated up to 250V and 20 Amps. The C19 mates with a C20 inlet, and is commonly used in a jumper cable scenario in IT Installations providing power from a PDU to a server, router, switch or other computing device. The C19 is typically used in high powered blade server chassis, large network routers, and other IT equipment that draws more power than a standard C13 can accommodate.

Specifications

Voltage (Volts) 125/250V
Current (Amps) 20 Amps

Mates with: IEC 60320 C20 Inlet

IEC 60320 C20 Inlet

Commonly found on:

Power distribution connection
High powered switch
Rack mount server
High power IT equipment
Data centers

Australia/New Zealand AS/NZS 3112 10A 250V

Australia/New Zealand AS/NZS 3112 10A 250V

The Australia AS/NZS 3112 3 Pin is the standard 3 Pin connector for Australia, New Zealand, Fiji, Papua New Guinea and many other pacific island countries. This is a grounded connector with many different variations depending on the amperage rating. Due AS/NZS regulations, the "line" and "neutral" pins now must be insulated. The best way to determine what Australia AS/NZS 3112 3 Pin you need is by the ground pin which changes with the amperage rating. The 10A plug has similar thickness ground pin compared with line/load. The 15A plug has a slightly wider ground pin. The 20A plug has a thicker ground/line and load pin. The 25A plug has an inverted "L" shaped ground. The 32A plug has a sideways "U" shaped ground. The plugs are capable of upwards compadibility but not vice versa. (i.e. the 10A plug will fit in any connector).

Specifications

Current (Amps) 10 Amps
Voltage (Volts) 250 volts

Mates with: AS/NZS 3112 10A Inlet/Plug

AS/NZS 3112 10A Inlet/Plug

Commonly found on:

Televisions
Kitchen Appliances
IT equipment
Small electrical motors

Europe CEE7/16 2Pin 2.5A 250V

Europe CEE7/16 2Pin 2.5A 250V

The Europe CEE7/16 2Pin is a 2 pole, ungrounded plug that is rated for 250V and 2.5A. Also known as the Europlug, this is physically not compatible with similar looking receptacles installed in the UK and Ireland, due to protection against over current and conflicting legislative safety standards.

Specifications

Current (Amps) 2.5 Amps
Voltage (Volts) 250 volts

Mates with: CEE7/16 2.5A Europlug Inlet

CEE7/16 2.5A Europlug Inlet

Commonly found on:

Video equipment
Non grounded low power device

Europe Schuko CEE7/3 (Female)

Europe Schuko CEE7/3 (Female)

The connector (FEMALE) is a Type F Schuko CEE7/3 which accepts the Type F Schuko CEE7/7 plug. For use in international projects in Europe, Germany, Algeria, Austria, Azerbaijan, Belarus, Belgium, Bosnia and Herzegovina, Brunei, Bulgaria, Burundi, Cameroon, Cape Verde, Central Africa Rep, Chad, Comoros, Congo Democratic Republic, Croatia, Czech Republic, Djibouti, Egypt, Eritrea, Finland, France, French Guiana, Gabon, Georgia, Germany, Greece, Greenland, Guadeloupe, Guinea, Guinea-Bissau, Hungary, Iceland, Indonesia, Jordan, Kazakhstan, South Korea, Kyrgyzstan, Liechtenstein, Luxembourg, Macedonia, Madagascar, Mali, Martinique, Monaco, Montserrat, Morocco, Mozambique, Netherlands, Netherlands Antilles, New Caledonia, Norway, Philippines, Portugal, Reunion, Romania, Russia, San Marino, Senegal, Serbia and Montenegro, Slovenia, Spain, Suriname, Sweden, Syria, Togo, Tunisia, Turkey, Ukraine, Vietnam.

Specifications

Voltage (Volts) 250 volts
Current (Amps) 16 Amps

Mates with: Schuko CEE7/7 Inlet/Plug

Schuko CEE7/7 Inlet/Plug

Commonly found on:

Kitchen Appliances
Air compressors

Argentina IRAM 2073 Connector (F) 10A 250V

Argentina IRAM 2073 Connector (F) 10A 250V

The IRAM 2073 Connector (Female) is rated for 250VAC and 10Amps in Argentina. It is the standard connector type in this region for a grounded power supply.

Specifications

Current (Amps) 10 Amps
Voltage (Volts) 250 volts

Mates with: IRAM 2073 10A Inlet/Plug

IRAM 2073 10A Inlet/Plug

Commonly found on:

Televisions
IT equipment
Small electrical motors
Commercial appliances

Brazil NBR14136 3PIN 10A 250V

Brazil NBR14136 3PIN 10A 250V

The NBR14136 3 Pin Connector (Female) type is rated for 250VAC and 10 Amp in Brazil. It is the lower power version of the 20A NBR14136 Connector type.

Specifications

Current (Amps) 10 Amps
Voltage (Volts) 250 volts

Mates with: NBR14136 3p 10A Inlet/Plug

NBR14136 3p 10A Inlet/Plug

Commonly found on:

Kitchen Appliances
IT equipment
Space heaters
Small electrical motors

Denmark AFSNIT 107-2-D1 Connector (F) 16A 250V

Denmark AFSNIT 107-2-D1 Connector (F) 16A 250V

The AFSNIT 107-2-D1 Connector (Female) type is rated for 250VAC and 16 Amps in Denmark. It is a grounded connector with 3 conductors, and also referred to as the international IEC type K connector.

Specifications

Current (Amps) 16 Amps
Voltage (Volts) 250 volts

Mates with: AFSNIT 107-2-D1 Inlet/Plug

AFSNIT 107-2-D1 Inlet/Plug

Commonly found on:

Small electrical motors
Televisions
IT equipment
Commercial appliances

UK BS1363 Angled (F)

UK BS1363 Angled (F)

The UK BS1363 Receptacle configuration is rated for 250VAC and 13 Amps in the United Kingdom. This receptacle is also referred to as the IEC type G and mates with the standard plug type in the United Kingdom to provide power to it.

Specifications

Voltage (Volts) 250 volts
Current (Amps) 13 Amps

Mates with: UK BS1363 Inlet/Plug

UK BS1363 Inlet/Plug

Commonly found on:

IT equipment
Small electrical motors

Switzerland SEV 1011 3-Pin 10A (F) Type J

Switzerland SEV 1011 3-Pin 10A (F) Type J

The SEV1011 3 Pin 10A Connector (Female) is rated for 250VAC and 10A in Switzerland. It is the smaller configuration of the 16A and has a slightly different configuration spacing to prevent cross connection.

Specifications

Current (Amps) 10 Amps
Voltage (Volts) 250 volts

Mates with: SEV 1011 10A Inlet/Plug

SEV 1011 10A Inlet/Plug

Commonly found on:

Small electrical motors
IT equipment
Desktop computers

BS546 15A

BS546 15A

The BS546 15A Connector is rated for 250VAC and 15 Amps globally. It is a grounded connector type, commonly found in South Africa and has 3 recessed holes to mate with the matching BS546 15A plug type.

Specifications

Current (Amps) 15 Amps
Voltage (Volts) 250 volts

Mates with: BS546 16A Inlet/Plug

BS546 16A Inlet/Plug

Commonly found on:

Small electrical motors
Commercial appliances
IT equipment

Italy CEI23-50 (CEI23-16) 10A(S11) - Type L

Italy CEI23-50 (CEI23-16) 10A(S11) - Type L

The CEI23-50 10A Connector type is rated for up to 250VAC and 10Amps in Italy. It can only be mated with the CEI23-50 10A plug type.

Specifications

Current (Amps) 10 Amps
Voltage (Volts) 250 volts

Mates with: CEI23-50 10A Inlet/Plug

CEI23-50 10A Inlet/Plug

Commonly found on:

Small electrical motors
Televisions
Kitchen Appliances
IT equipment
Desktop computers

Argentina IRAM 2073 3 Pin (M) - 10A

Argentina IRAM 2073 3 Pin (M) - 10A

The IRAM 2073 3 Pin 10 Amp Plug (Male) is rated for 250VAC and 10 Amperes in Argentina. It is designed to mate with the matching 10A IRAM 2073 connector/ outlet.

Specifications

Current (Amps) 10 Amps
Voltage (Volts) 250 volts

Mates with: IRAM 2073 3p 10A Outlet

IRAM 2073 3p 10A Outlet

Commonly found on:

Houses
Manufacturing facilities
Warehouses
Data centers

Argentina IRAM 2063 2 Pin (M) - 2.5A

Argentina IRAM 2063 2 Pin (M) - 2.5A

The IRAM 2063 2 Pin Plug (Male) configuration is rated for 250VAC and 2.5 Amps in Argentina. It is an un-grounded plug type and can plug into the 10A 3 Pin receptacle to access power.

Specifications

Current (Amps) 2.5 Amps
Voltage (Volts) 250 volts

Mates with: IRAM 2073 3p 10A Outlet

IRAM 2073 3p 10A Outlet

Commonly found on:

Houses
Manufacturing facilities
Warehouses
Data centers

Australia AS/NZS 3112 2 Pin - 2.5A

Australia AS/NZS 3112 2 Pin - 2.5A

The AS/NZS 3112 2 Pin Plug (Male) configuration is rated for 250VAC and 2.5Amps in Australia and New Zealand. It can be energized by plugging into the 3112 3pin receptacle.

Specifications

Current (Amps) 2.5 Amps
Voltage (Volts) 250 volts

Mates with: AS/NZS 3112 3P 10A Outlet

AS/NZS 3112 3P 10A Outlet

Commonly found on:

Houses
Hospitals
Manufacturing facilities
Warehouses

Australia AS/NZS 3112 3 Pin - 10A

Australia AS/NZS 3112 3 Pin - 10A

The AS/NZS 3112 3 Pin 10A Plug (Male) configuration is rated for 250VAC and 10 Amps in Australia and New Zealand. It is a grounded plug and the standard plug type for the region.

Specifications

Current (Amps) 10 Amps
Voltage (Volts) 250 volts

Mates with: AS/NZS 3112 3P 10A Outlet

AS/NZS 3112 3P 10A Outlet

Commonly found on:

Houses
Hospitals
Manufacturing facilities
Warehouses

Brazil NBR14136 10A 250V (3 Pin 3.7mm Grounded)

Brazil NBR14136 10A 250V (3 Pin 3.7mm Grounded)

The NBR14136 10A Plug (Male) configuration is rated for 250VAC and 10 Amps in Brazil. It has 3 pins and a dedicated ground conductor.

Specifications

Current (Amps) 10 Amps
Voltage (Volts) 250 volts

Mates with: NBR14136 10A Outlet

NBR14136 10A Outlet

Commonly found on:

Houses
Warehouses
Data centers
Manufacturing facilities

Europe CEE7/16 2Pin 2.5A 250V

Europe CEE7/16 2Pin 2.5A 250V

The CEE7/16 2 pin plug configuration is rated for 250VAC and 2.5Amps. It is commonly refered to as the "Euro-plug" and is one of the most widely used plug types around the world. The common application is for powering smaller devices throughout Europe, since the plug type is only rated for 2.5 amperes.

Specifications

Current (Amps) 2.5 Amps
Voltage (Volts) 250 volts

Mates with: Schuko CEE7/7 Outlet

Schuko CEE7/7 Outlet

Commonly found on:

Houses
Warehouses
Hospitals
Manufacturing facilities

China GB2099 3Pin 10A Plug

China GB2099 3Pin 10A Plug

The GB2099 3P 10A Plug (Male) configuration is rated for 250VAC and 10 Amps in China. It is a grounded plug type and the standard plug type for this region for household devices.

Specifications

Current (Amps) 10 Amps
Voltage (Volts) 250 volts

Mates with: GB2099 3P 10A Outlet

GB2099 3P 10A Outlet

Commonly found on:

Houses
Warehouses
Data centers
Manufacturing spaces

European Schuko CEE7/7 - Straight

European Schuko CEE7/7 - Straight

The plug (MALE) is a Type F Schuko CEE7/7. It fits both E (France) and F (European / Germany) type outlets (sockets). Available in straight or down/up angle orientation. The plug has two round pins (line and neutral) each 4.8 mm diameter, 19 mm long and spaced 19 mm apart. The plug also has two flat areas (top and bottom sides) and a female contact for the ground.

Specifications

Voltage (Volts) 250 volts
Current (Amps) 16 Amps

Mates with: Schuko CEE7/7 Outlet

Schuko CEE7/7 Outlet

Commonly found on:

Houses
Warehouses
Hospitals
Manufacturing facilities

European Schuko CEE7/7 - Down Angle

European Schuko CEE7/7 - Down Angle

The plug (MALE) is a Type F Schuko CEE7/7. It fits both E (France) and F (European / Germany) type outlets (sockets). Available in straight or down/up angle orientation. The plug has two round pins (line and neutral) each 4.8 mm diameter, 19 mm long and spaced 19 mm apart. The plug also has two flat areas (top and bottom sides) and a female contact for the ground.

Specifications

Voltage (Volts) 250 volts
Current (Amps) 16 Amps

Mates with: Schuko CEE7/7 Outlet

Schuko CEE7/7 Outlet

Commonly found on:

Houses
Warehouses
Hospitals
Manufacturing facilities

China GB2099 3Pin 16A Plug

China GB2099 3Pin 16A Plug

Specifications

Current (Amps) 16 Amps
Voltage (Volts) 250 volts

Mates with: GB2099 3P 16A Outlet

GB2099 3P 16A Outlet

Commonly found on:

Houses
Warehouses
Manufacturing spaces
Data centers

Denmark AFSNIT 107-2-D1 3Pin 13A

Denmark AFSNIT 107-2-D1 3Pin 13A

The AFSNIT 107-2-D1 plug type configuration is rated for 250VAC and 13 Amps of power in Denmark. It is also classified as the international type K plug type and is the standard plug type for Denmark.

Specifications

Current (Amps) 13 Amps
Voltage (Volts) 250 volts

Mates with: AFSNIT 107-2-D1 Outlet

AFSNIT 107-2-D1 Outlet

Commonly found on:

Houses
Warehouses
Manufacturing facilities
Commercial kitchens

Switzerland SEV 1011 3-Pin 10A (M) Type J

Switzerland SEV 1011 3-Pin 10A (M) Type J

The SEV 1011 3 pin plug configuration is rated for 250VAC and 10 Amperes in Switzerland. This configuration is also classified as IEC type J, and is the standard low power plug type in Switzerland. The pins of the 10 amp plug type are circle shaped and slightly smaller diameter, allowing them to be plugged into both the 10 amp and 16 amp receptacle types.

Specifications

Current (Amps) 10 Amps
Voltage (Volts) 250 volts

Mates with: SEV 1011 3P 10A Outlet

SEV 1011 3P 10A Outlet

Commonly found on:

Houses
Data centers
Warehouses
Manufacturing spaces

Switzerland SEV 1011 3-Pin 16A (M) Type J

Switzerland SEV 1011 3-Pin 16A (M) Type J

The SEV 1011 3 pin 16a plug type configuration is rated for 250VAC and 16 Amperes of power in Switzerland. It is also classified under the IEC type J type. The pins are square shaped and slightly larger than the 10 amp plug type pins. This prevents backwards compatibility and prevents electrical hazard.

Specifications

Current (Amps) 16 Amps
Voltage (Volts) 250 volts

Mates with: SEV 1011 3P 16A Outlet

SEV 1011 3P 16A Outlet

Commonly found on:

Houses
Warehouses
Manufacturing spaces
Data centers

South Africa SANS 164-3 (BS546) 3Pin 6A (small) Type D

South Africa SANS 164-3 (BS546) 3Pin 6A (small) Type D

The SANS 164-3 6A plug type configuration is rated for 250VAC and 6 Amps in South Africa.

Specifications

Voltage (Volts) 250 volts
Current (Amps) 6 amps
Current (Amps) 16 Amps

South Africa SANS 164-1 (BS546) 3Pin 16A (LARGE) Type M

South Africa SANS 164-1 (BS546) 3Pin 16A (LARGE) Type M

The SANS 164-1 16A plug type configuration is rate for 250VAC and 16 Amps in South Africa. The plug type was previously know as BS546 (Old-English) configuration, and is the standard plug type for larger appliances in South Africa. The plug type is also referred to as the international type M.

Specifications

Current (Amps) 16 Amps
Voltage (Volts) 250 volts

Mates with: SANS 164-1 16A Outlet

SANS 164-1 16A Outlet

Commonly found on:

Houses
Warehouses
Manufacturing spaces

Italy CEI 23-50 3-Pin 16A Type L

Italy CEI 23-50 3-Pin 16A Type L

The CEI 23-50 3 Pin 16A plug type configuration is rated for 250VAC and 16Amps in Italy. It is also classified as the type L plug type and is the standard plug type for general appliances in Italy.

Specifications

Current (Amps) 16 Amps
Voltage (Volts) 250 volts

Mates with: CEI 23-50/ CEI 23-16 16A Outlet

CEI 23-50/ CEI 23-16 16A Outlet

Commonly found on:

Houses
Warehouses
Data centers
Manufacturing facilities

Japan JIS8303 3-Pin 5-15P

Japan JIS8303 3-Pin 5-15P

The Japan JIS8303 3-Pin plug configuration is rated for 125VAC and 15 Amperes in Japan. The design is known as IEC Type B and is nearly identical to the United States version NEMA 5-15P, with the exception of having different global electrical approvals. This is the standard plug type in Japan for household power.

Specifications

Voltage (Volts) 125 volts
Current (Amps) 15 Amps

Mates with: JIS8303 3-Pin Outlet

JIS8303 3-Pin Outlet

Commonly found on:

Hospitals
Warehouses
Manufacturing spaces
Houses in Japan

UK BS1363 ANGLED

UK BS1363 ANGLED

The UK BS1363 plug type configuration is rated for 250VAC and 13 Amperes of power in the United Kingdom. It is also classified as the IEC type G, and is the standard plug type for electrical appliances in the United Kingdom. It is the only plug type to have an internally wired fuse in the plug body, adding an additional layer of electrical protection.

Specifications

Voltage (Volts) 250 volts
Current (Amps) 13 Amps

Mates with: UK BS1363 Outlet

UK BS1363 Outlet

Commonly found on:

Houses
Home workshops
Hospitals
Manufacturing facilities
Warehouses
Hospitals

Thailand TIS 166-2549 16A 250V

Thailand TIS 166-2549 16A 250V

The Thailand TIS 116-2549 plug configuration is rated for 250VAC and 16 Amps in Thailand. This configuration is also known as the IEC type O. It is the standard plug type for electrical use in Thailand for residential settings.

Specifications

Current (Amps) 16 Amps
Voltage (Volts) 250 volts

Mates with: TIS 166-2549 Outlet

TIS 166-2549 Outlet

Commonly found on:

Manufacturing spaces
Hospitals
Home workshops